2019 John Deere 8345R - one owner - MFWD w/ Suspension - IVT - Guidance-ready - Guidance Display - Rear PTO: 540/1000 - Duals Tire - 50K Transmission - AutoPowr Infinitely Variable Transmission (IVT) 50 km/h (31 mph) - 4600 Command Center - Implement Guidance - RowSense - Section Control - John Deere Active Command Steering (ACS)4600 Command Center- Automation 4.0 - 4600 V2 Processor - Premium CommandView III Cab with Cab Suspension - Premium Radio Package - Right-hand Reverser - Linear-Type Transmission Controls - John Deere PowerTech 9.0 L (549 cu. in.) 6 Cylinder Tier 4/Stage V Compliant Diesel Engine - 321 L/min (85 gpm) Dual Hydraulic Pump - Five Premium Rear Remote SCVs with Electrohydraulic (EH) Controls, Premium Couplers, and High Pressure Relief Levers45 mm - (1-3/4 in.) 1,000 rpm (20-spline) capable of 35 mm (1-3/8 in.) 540 rpm (6-spline) / 1,000 rpm (21-spline) PTO - 9,072 kg (20,000 lb) capacity 3-Point Hitch (Cat 4N/3) Hitch with Sway Blocks and Quik-Coupler - Hydraulic center link - Category 4 adjustable Swinging Drawbar with 50 mm (2 in.) Pin with heavy duty support120 mm (4.72 in.) diameter by 3010 mm (118.5 in.) length with Double Taper Wheel Hubs - 480/95R50 164B R1W Radial in Dual Wheel Configuration - ILS with hydraulic differential lock, wet multi-disk brakes, fully enclosed driveline and Group 49 Rear Tires420/85R34 147B R1W Radial in Dual Tire Configuration - Eight Position Premium Lighting - Fenders, Pivoting Front - 480 mm (18.9 in.) Wide Fenders, Rear Extensions 2.55 m (100 in.) Width - Ethernet Switch - Radar, Dual Beam Sensor - Actively Cooled Refrigeration Unit 6.4 L³ (391 cu. in.) - Cold Weather Start Kit - Auxiliary Hydraulic Connections - 1/2 in.Rear Hydraulic Center Link - Category 4 (120 mm) - Trailer Brake, Dual Line Hydraulic - Weight, front support with twenty-two suitcase weights - One Pair 625 kg (1378 lb), One Pair 70 kg (154 lb) Starter Weights and One Pair 900 kg (1984 lb) Weight for the Outside of Dual Wheel