1,300,000 GPD | MAXIMUM 1500PPM, FEED WATER TDS, 460V/3PH/60HZ, INCLUDES THE FOLLOWING- POWDER COATED CARBON STEEL FRAME, (7) FRP PRESSURE VESSELS (PROTEC OR CODELINE) RATED AT 300 PSI, (42) 8IN TFC SPIRA WOUND MEMBRANES (FILMTEC OR HYDRANAUTICS), PRESSURE GAUGES AS NEEDED, (1) CONDUCTIVITY METER ON PRODUCT LINE AND PH ON PRODUCT LINE, LOW AND HIGH PRESSURE SWITCHES, (2) FLOW METERS FOR REJECT AND PRODUCT LINE, HIGH PRESSURE PUMP (GRUNDFOS OR EQUAL), 5 MICRON PRE-FILTER WITH SS HOUSING, PLC CONTROL PANEL (SIEMENS S7-1200) OR MICROPROCESSOR, LOCATED IN JEFFERSON, LA. (1) PART NUMBER- BW-320K-7680 (1) DECHLORINATION DOSING SYSTEM - 24 GPD, ADJUSTABLE METERING PUMP, POLYETHYLENE SOLUTION TANK, MANUAL, ORP MONITOR, 220V/1ph/60Hz, PART NUMBER: CDS24-2-ORP, LOCATED IN WESTWEGO, LA. (1) ANTISCALANT DOSING SYSTEM - 30 GPD, ADJUSTABLE METERING PUMP, POLYETHYLENE SOLUTION TANK, MANUAL, 220V/1ph/60Hz, PART NUMBER: CDS30-2, LOCATED IN WESTWEGO, LA. (1) ANTISCALANT 55 GALLON DRUM - PART NUMBER: PA0100-PLUS-55, LOCATED IN WESTWEGO, LA. (1) POST pH DOSING SYSTEM - 76 GPD, ADJUSTABLE METERING PUMP, POLYETHYLENE SOLUTIONS TANK, MANUAL pH MONITOR, 220V/1pH/60Hz, PART NUMBER: CDS76-pH-S, LOCATED IN WESTWEGO, LA. Overview: An industrial tap water reverse osmosis system was designed to treat higher than normal salinity levels. This commercial reverse osmosis system is model #TW-320K-7680 from our RO-500 Series. Status indicators Motor starter NEMA 12 enclosure Low pressure switch High pressure switch Liquid filled pressure gauges Permeate conductivity monitor Permeate & concentrate flow meters Powder coated carbon steel frame 8” TFC spiral wound membranes Stainless steel multi-stage pump with TEFC motor FRP membrane housing 5 micron cartridge prefilter 460V/3Ph/60Hz power supply PLC based control panel Programmable time delay and set points SELLING SUBJECT TO OWNER CONFIRMATION